Location:
Search - dnw u
Search list
Description: VC应用程序，通过usb将文件下载到板子上，三星公司原码-VC applications through usb the file downloaded to the board, the Samsung
Platform: |
Size: 89088 |
Author: 海平 |
Hits:
Description: 支持S3C24x0/yaffs/USB/CS8900/DM9000/OpenJTAG/Nor,Nand启动的u-boot
添加的功能：
1. 同时支持S3C2410和S3C2440
2. 支持串口xmodem协议
3. 支持USB下载，可以在PC上使用dnw传数据
4. 支持网卡芯片CS8900
5. 支持NAND Flash读写
6. 支持从Nor/Nand Flash启动
7. 支持烧写yaffs文件系统映象-Support S3C24x0/yaffs/USB/CS8900/DM9000/OpenJTAG/Nor, Nand start u-boot to add the functionality: 1. At the same time, support for S3C2410 and S3C24402. Support XMODEM Serial Protocol 3. To support the USB to download, you can use the PC on dnw Chuan-data 4. to support the network adapter chip CS89005. support for NAND Flash read and write 6. support from the Nor/Nand Flash boot 7. yaffs file system support programmer mapping
Platform: |
Size: 126976 |
Author: qin |
Hits:
Description: DNW中关于USB的驱动，可以用于在DNW中通过USB端口进行程序的烧写和下载到开发板中。-DNW on the USB drive, can be used in DNW through USB port procedures programmer and downloaded to the development board.
Platform: |
Size: 926720 |
Author: james |
Hits:
Description: s3c6410开发品平台按键功能程序，在系统的 QT界面内可以实现按键控制。-platform for the development of key products s3c6410 function procedure, the QT interface in the system can be achieved with control buttons.
Platform: |
Size: 3072 |
Author: 张军 |
Hits:
Description: 发布支持USB下载的eboot（WINCE5.0 for ARMSYS2440使用）！
eboot运行后使用选项U，然后用DNW下载nk.bin即可！
该eboot保存所有nandflash分区、格式化、坏块处理功能，烧录之后Residentflash分区可正常建立。
适用于Wince5.0 s3c2440a-Release support for USB download eboot (WINCE5.0 for ARMSYS2440 use)! eboot running to use option U, and then use DNW download nk.bin can be! The eboot save all nandflash partition, format, bad block handling functions, burn after Residentflash partition can be properly established. Apply to Wince5.0 s3c2440a
Platform: |
Size: 80896 |
Author: 闻丰 |
Hits:
Description: dnw for linux自己gcc一下就可以从u转串down东西了-dnw for linux
Platform: |
Size: 20480 |
Author: changlizhi |
Hits:
Description: 可供uboot移植的USB DNW驱动(u-boot版本 20130101 )-Available uboot transplant USB DNW driver (u-boot version 20130101)
Platform: |
Size: 30720 |
Author: OC |
Hits:
Description: ok6410_sdram,OK6410_使用DNW通过U-BOOT_下载的裸机SDRAM程序-ok6410_sdram, OK6410_ use DNW download via U-BOOT_ bare metal SDRAM program
Platform: |
Size: 7168 |
Author: 黄金 |
Hits:
Description: dnw wince716 1. Run “DNW.exe” on PC and “Communication” -> “Option” to choose proper communication parameters, then “Serial” ->“Connect”.
2. Applying power to MT688.
3. System will run and message will show in DNW windows.
4. Pressing “space” key to display action menu in DNW.
5. Using command ‘A’ to erase NAND.
6. Using command ‘F’ to format NAND.
7. Selecting ‘6’ to enable download to NAND.
8. Selecting ‘U’ command, then download “Stepldr.nb0”.
9. Press reset button to restart system.
10. Repeat step 8 to step 11.
11. Selecting ‘U’ command, then download “Eboot.bin”.
12. Unplug power.
13. Set BOOT_SEL0 – BOOT_SEL2 as “001” as step 4 described in “H/W Settings on PCB V1” section for PCB1, or “H/W Settings on PCB V1” for PCB2.
14. Applying power again and system should boot NAND.
-dnw wince716 1. Run “DNW.exe” on PC and “Communication” -> “Option” to choose proper communication parameters, then “Serial” ->“Connect”.
2. Applying power to MT688.
3. System will run and message will show in DNW windows.
4. Pressing “space” key to display action menu in DNW.
5. Using command ‘A’ to erase NAND.
6. Using command ‘F’ to format NAND.
7. Selecting ‘6’ to enable download to NAND.
8. Selecting ‘U’ command, then download “Stepldr.nb0”.
9. Press reset button to restart system.
10. Repeat step 8 to step 11.
11. Selecting ‘U’ command, then download “Eboot.bin”.
12. Unplug power.
13. Set BOOT_SEL0 – BOOT_SEL2 as “001” as step 4 described in “H/W Settings on PCB V1” section for PCB1, or “H/W Settings on PCB V1” for PCB2.
14. Applying power again and system should boot NAND.
Platform: |
Size: 12044288 |
Author: ninjatune81 |
Hits:
Description: mini2440的uboot编译好的，t支持tftp dnw等(Mini2440's uboot compiled)
Platform: |
Size: 113664 |
Author: zzy231
|
Hits: